Staffing agency markup: how to set bill rates and fees
Staffing agency markup is the percentage you add to a temp's hourly pay to get the bill rate you charge the client. Bill rate = pay rate x (1 + markup). A $20 pay rate at a 50% markup bills at $30. Payroll taxes and workers' comp come out of that $10 before you see any profit.
By Brett Iredale, Founder and CEO of Lovelio. Updated
A temp agency makes money on the gap between what it pays the worker and what it bills the client. Direct hire agencies charge a one-off fee instead. Many US staffing agencies do both. Get the markup wrong and you can bill every week and still lose money, because the employer's taxes and insurance come out of the gap. This page shows how to build a bill rate from the pay rate up, how markup differs from margin, and how to price direct hire and temp-to-hire.
How to set a bill rate
1.Start with the pay rate
Find what the worker needs to earn per hour for the role in your metro. The client's budget and local job ads tell you.
Cost: NothingTime: 1 hour
2.Add the statutory burden
Add the employer's Social Security and Medicare, federal and state unemployment tax, and workers' comp for the job's class code.
Cost: NothingTime: 1 hour
3.Add your other costs
Add anything else you pay per hour worked: benefits you offer, background checks, payroll service fees.
Cost: NothingTime: 30 minutes
4.Pick a target gross margin
Decide what share of the bill rate you keep after the worker's pay and burden. That pays for your rent, recruiters and profit.
Cost: NothingTime: 30 minutes
5.Work out the bill rate and the markup
Bill rate = burdened cost / (1 - target margin). Then express it as a markup on pay for the client.
Cost: NothingTime: 15 minutes
The three formulas
Markup is measured against the pay rate. Gross margin is measured against the bill rate. Clients talk in markup. Your bank account runs on margin.
- Bill rate = pay rate x (1 + markup %)
- Markup % = (bill rate - pay rate) / pay rate
- Gross margin % = (bill rate - pay rate - burden) / bill rate
The statutory burden
When a temp is on your payroll, you are the employer. You pay the employer side of these taxes on every hour they work, on top of their pay.
Social Security is 6.2% and Medicare is 1.45%, matched by the same amounts taken from the worker. In 2026, Social Security applies to the first $184,500 of wages. The extra 0.9% Additional Medicare tax on wages over $200,000 is taken from the worker only, with no employer match.
Federal unemployment tax (FUTA) is 6.0% on the first $7,000 of each worker's wages a year. Most employers get a credit of up to 5.4% for paying state unemployment tax, so the net rate is 0.6%, or $42 per worker a year. In a credit reduction state, the credit is smaller and you pay more. The Department of Labor names those states each year.
State unemployment tax (SUTA) rates and wage bases are set by each state. New employers get a starting rate, which changes once you have a claims history. Workers' comp insurance is run through each state, and the rate depends on the job's class code. Warehouse work costs far more to insure than office work.
| Cost | Employer rate | Applies to | Set by |
|---|---|---|---|
| Social Security | 6.2% | First $184,500 of wages (2026) | IRS |
| Medicare | 1.45% | All wages | IRS |
| FUTA | 0.6% net (6.0% less up to 5.4% credit) | First $7,000 of wages | IRS |
| SUTA | Varies by state and by employer | The state wage base | Your state |
| Workers' comp | Varies by class code | Payroll, per $100 | Your state and insurer |
- Staffing agency rules by stateWhat your state asks of a temp employer
Worked example: a $20 an hour temp
This example uses a $20 pay rate and a 50% markup. The SUTA rate (3%) and workers' comp rate ($2.00 per $100 of payroll) are assumptions for the example. Use your own state rate and your insurer's quote. FUTA is shown at 0.6% while the worker is under the $7,000 wage base. After that it drops to zero for the year.
| Line | How it is worked out | Per hour |
|---|---|---|
| Pay rate | What the temp earns | $20.00 |
| Social Security and Medicare | 7.65% of $20.00 | $1.53 |
| FUTA | 0.6% of $20.00, until wages reach $7,000 | $0.12 |
| SUTA | Assumed 3% of $20.00 | $0.60 |
| Workers' comp | Assumed $2.00 per $100 of payroll | $0.40 |
| Burdened cost | Pay plus burden | $22.65 |
| Bill rate | $20.00 x 1.50 (50% markup) | $30.00 |
| Gross profit | $30.00 - $22.65 | $7.35 |
| Gross margin | $7.35 / $30.00 | 24.5% |
Markup is not margin
In the example, a 50% markup leaves a 24.5% gross margin. The spread looks like $10 an hour. After burden, you keep $7.35.
To price from a target margin, work backwards from the burdened cost. For a 25% gross margin on a $22.65 burdened cost: $22.65 / (1 - 0.25) = $30.20. Divide by the $20 pay rate and that is a 51% markup.
Quote clients a markup or a bill rate, and track your margin. If a client pushes your markup down 10 points, rerun the sum before you agree. At a 40% markup on the example, the bill rate is $28.00 and your gross profit falls to $5.35 an hour.
Direct hire fees
A direct hire fee is a one-off charge when the client hires your candidate onto their own payroll. It is usually a percentage of the candidate's first-year base salary, paid once the person starts.
For example, a $60,000 salary at a 20% fee is a $12,000 fee. Some agencies use a flat fee for high-volume roles instead. Write the percentage, what counts as salary (base only, or base plus bonus) and the payment terms into your staffing agreement before you send a single candidate.
Temp-to-hire conversion fees and guarantees
Temp-to-hire means the worker starts as your temp and the client can hire them later. Your markup earns back part of your direct hire fee each week they work, so the conversion fee usually falls the longer they stay on your payroll.
A common structure is a fee that drops to zero after a set number of hours. For example, a conversion fee that falls by a set amount every 160 hours and reaches zero at 520 hours.
A guarantee period protects the client if a direct hire leaves early. For example, a 60-day guarantee with a free replacement, or a part refund on a sliding scale. Offer a replacement before a refund. It keeps the fee in your bank.
Fee models compared
The ranges below are examples to start your own pricing from. No trade body publishes standard US markups or fees, so test your numbers against what clients in your metro already pay.
| Model | Example range | When to use it |
|---|---|---|
| Temp markup on pay | For example 25% to 75% | Ongoing temp and contract work on your payroll |
| Direct hire fee | For example 15% to 25% of first-year base salary | Permanent roles hired onto the client's payroll |
| Flat direct hire fee | For example $2,000 to $5,000 a hire | Many hires of the same entry-level role |
| Temp-to-hire conversion fee | For example a fee that reaches $0 after 520 hours | Clients who want to try a worker first |
| Guarantee period | For example 30 to 90 days | Every direct hire and conversion fee |
- Staffing agreement templateWhere your markup, fees and guarantee go
- What it costs to start a staffing agencyPayroll funding and startup costs
Keep each client's terms on the record
In Lovelio, a client's terms sit on the client record: the direct hire fee %, the contract margin, payment terms and the guarantee days. Every job you open for that client takes those terms, so each consultant quotes the same numbers.
Questions
What is a typical staffing agency markup?
It depends on the role, the state and the client. Work it out from the pay rate, the statutory burden and the gross margin you need. In the example on this page, a 50% markup on a $20 pay rate leaves a 24.5% gross margin.
What is the difference between markup and margin?
Markup is the gap as a share of the pay rate. Gross margin is what you keep after pay and burden, as a share of the bill rate. A 50% markup on $20 bills at $30, but after taxes and insurance the margin in the example is 24.5%.
How do you calculate a bill rate?
Bill rate = pay rate x (1 + markup). To price from a target margin, add the burden to the pay rate first, then divide by (1 - target margin).
What payroll taxes does a staffing agency pay on temps?
The employer side of Social Security (6.2%, on the first $184,500 of wages in 2026) and Medicare (1.45%), FUTA (usually 0.6% net on the first $7,000), and your state's unemployment tax. Workers' comp insurance is on top.
How much do staffing agencies charge for direct hire?
Usually a percentage of the candidate's first-year base salary, set in your staffing agreement. For example, a 20% fee on a $60,000 salary is $12,000.
Sources
Checked . Rules change, so confirm with the regulator before you apply.
Start your staffing agency on Lovelio
Apply for Lovelio Launch and run your first 2 months free.